| Shopping Cart Empty Welcome, sign in Private person / Company / Distributor |
| Reference | Availability | Amount | Purchase | ||
|---|---|---|---|---|---|
|
SR100 |
|
2,050.00€
2,132.00€ (VAT Incl.)
|
MARINA is an amphibious wheelchair that can be used both inside and outside the water. It is specially designed to provide individuals with disabilities access to both the beach and its surroundings as the bath water.
There are two important characteristics that differentiate it from a conventional wheelchair, floats and wide tires.
The floats are required to allow adequate flotation in the water. The wide tires are needed for the seat will not sink in the sand.
Folds and disassembles easily without tools for storage and transport. b>
The transfers can be front or side. For users with lower limb control transfers can be head-on with the help of a wizard, shall place the footrest in its lowest position. To move the chair through the sand and water entering the footrest can be raised to a height comfortable for the user.
For users with less control of the lower limbs or without their control, the transfers are made laterally. To do this, you have to lift one of the floats through the release of the pin. Attach to the seat structure to perform
transfer. Once transferred to the user, the float will be returned to its original position. Check the clip to the front bar float float blocks.
MARINA amphibious chair moves for any type of surface. On soft soils and the water inlet and outlet, the chair should be pulled by the shooter being able to help push forward from the handle of the passenger. On hard floors should push from the back of the chair.
MARINA amphibious chair is equipped with a flotation system consisting of several floats. In calm sea conditions provide conditions of stability and adequate buoyancy. The maximum stability of the chair is achieved when the person leans back against the backrest.
The accompanying person can help to raise and lower the chair into the water marina, holding and keeping the chair sunk.
The footrest system allows different positions from the lowest, almost touching the ground, to the highest, which is close to the line entry. At the time of the footrest transfers must be in its lowest position.
Once the transfer to place the footrest to the desired height by the user.
This product meets the standards that apply:
UNE-EN 12182: b> "Technical aids for persons with disabilities. General requirements and test methods. "
UNE-EN 12183: b> Wheelchairs manual propulsion
Directive 93-42-CEE. b> European Medical Device Directive.
Royal Decree 1591/2009. b>
| Dimensions (W x H x D) b> | 1120 x 1200 x 1670 mm (highest position footrest). 1120 x 1200 x 1470 mm (footrest in lowest position). |
| Weight seat b> | 37,250 kg |
| Maximum User Weight b> | 100 kg |
| Material structure b> | Aluminum |
| Floats b> | side / rear. Polyurethane foam filled polyethylene / polyethylene. |
| fabric seat and back b> | Fiber PVC coated polyester. |
| Rear wheel Ø400 b> | inflation pressure 36 PSI (lbf/pulg2) or 2.5 Kg/cm2 |
| Front wheel Ø250 b> | inflation pressure 30 PSI (lbf/pulg2) or 2.1 Kg/cm2 |
| Size and weight packaging b> | 152 x 75 x 60 cm 45.4 kg |